Spray Polyurethane Foam
Best for metal roofing with a positive pitch, our acrylic products provide superior adhesion and protection. Like all Energy Seal Coatings products, they maximize solar reflectance, ensure long-term waterproofing, and are non-toxic and VOC-compliant.
All of our products are available at a PPG Paints location near you.
Prep Products
Acu-Wash
Acu-Wash is a water-soluble detergent surfactant recommended for cleaning and pre-treating surfaces which will be coated with Energy Seal products.
Features and Benefits:
- Provides superior cleaning when used with high-pressure power washer
- Removes most contaminates from surface to be coated
- Environmentally safe, non-toxic, biodegradable and low-VOC
ACS00220/EA – 5-gallon bucket – Contact PPG for product pricing.
This product is available at a PPG Paints location near you.
Primer
Acu-Base Coat
A single component, water-based acrylic coating designed as a primer and UV protective coating for Spray Polyurethan Foam. It can also be used as a general purpose primer for Acu-Shield and Acu-Flex coatings.
Features and Benefits:
- Ready to use and easy to apply
- Provides high adhesive strength to most roof surfaces
- Excellent adhesion to various substrates
- Non-toxic, non-flammable and VOC compliant water based coating
This product is available at a PPG Paints location near you.
Acu-SPF 2.8 r
A sprayed-in-place, nominal 60 psi compressive strength, rigid, HFC-blown, closed-cell spray polyurethane foam (SPF) roofing system. This two-component SPF consists of side-A and side-B. Acu-SPF:2.8 provides an R-value of 6.3 per inch and a continuous insulation without thermal breaks.
Features and Benefits:
- Closed-cell SPF provides a fully adhered, sustainable air barrier and thermal insulation
- Lightweight
- Easy to maintain
- Quick installation time
- Enhances wind uplift resistance
- Excellent adhesion to most surfaces
- Self-flashing, seamless application
This product is available at a PPG Paints location near you.
Product Data Sheet Acu-SPF 2.8 r.pdf
Safety Data Sheets
Polyurethane Foam SIDE A.pdf
Polyurethane Foam SIDE B.pdf
ACU-SPF HFO
A sprayed-in-place, high compressive strength, rigid, Low GWP, closed-cell spray polyurethane foam (SPF) roofing system. This two-component SPF consists of side-A and side-B. Acu-SPF:HFO provides an R-value of 6.2 – 6.8 per inch and a continuous insulation without thermal breaks.
Features and Benefits:
-
Closed-cell SPF provides a fully adhered, sustainable air barrier and thermal insulation
-
Low global warming potential (LGWP)
-
Superior yield reduces cost and amount of material required
-
Enhanced wind uplift resistance- fully adhered roof system
-
Excellent adhesion to most surfaces
-
Meets state and US or Canadian federal regulation
This product is available at a PPG Paints location near you.
Product Data Sheet ACU-SPF HFO.pdf
Safety Data Sheets
Polyurethane Foam SIDE A.pdf
Polyurethane Foam SIDE B.pdf
Coatings
Acu-Flex:100
Acu-Flex:100 is a high-solids, single-component, VOC-compliant, moisture-cure silicone rubber coating. Specifically designed for use in roofing applications as a weatherproof, ultraviolet-resistant coating, it performs well under all weather conditions from sub-zero to high heat in excess of 200° F (93° C).
Features and Benefits:
- Provides a durable, seamless, flexible, waterproof membrane that resists lateral movement
- Allows for normal expansion and contraction
- Offers greater UV protection than other coatings
- Provides increased resistance to moisture penetration
- Provides excellent long-term protection and weatherability
ACS00249/EA – 5-gallon bucket (white) Contact PPG for product pricing.
ACS00257/EA – 5-gallon bucket (gray) Contact PPG for product pricing.
ACS00253/EA – 50-gallon drum (white) Contact PPG for product pricing.
ACS00253/EA – 50-gallon drum (gray) Contact PPG for product pricing.
This product is available at a PPG Paints location near you.
Acu-Shield
Acu-Shield is a single component, water-based, acrylic elastomeric coating. It is engineered to provide excellent weather barrier protection for a variety of roofing substrates.
Features and Benefits:
- Reduces daily expansion and contraction (thermal cycling)
- Contains strong rust inhibitive pigments
- Reflects 90% of infrared heat and UV rays
- Contains excellent reflective properties which help to reduce cooling costs
- Prevents premature aging and leaks
- Contains a strong mildewcide and fungicide
- Boasts excellent adhesion to various substances
- Provides superior resistance to dirt pickups and maintains reflectivity
- Non-toxic and VOC-compliant
ACS00223/EA – 5 gallon bucket – Contact PPG for product pricing.
ACS00233/EA – 50 gallon drum – Contact PPG for product pricing.
This product is available at a PPG Paints location near you.
Get in Touch
Location
Headquartered in Atlanta, GA